Wrong Artificale Horizont / Radio Module doesn`t work properly  

Page 2 / 2 Prev
  RSS

(@bonnietc)
Member
Joined:2 years  ago
Posts: 20
21/01/2018 6:22 pm  

And after t/o

 


ReplyQuote
(@mcfly)
Member
Joined:2 years  ago
Posts: 17
22/01/2018 10:44 am  
Posted by: JSS-Simulations

 

As requested to McFly, please download the cab file in the above Dropbox link, which is the cab file that is in the current installer, and test the aircraft for me using this cab file.  Then let me know.

Thanks

Janus

Sorry, but my next test flight is not before Thuesday this week. I will report and many thanks for your support. I think we will find out why this happens.
On Thuesday or wednesday maybe you can do a flight from my pc with teamviewer. We can meet us at a teamspeak server.


ReplyQuote
(@mcfly)
Member
Joined:2 years  ago
Posts: 17
22/01/2018 3:00 pm  

I had a second for a test. Exchange of the Cab folder doesn`t solve it.
i attached my C-160 CFG and P3Dv4.1 CFG. etc. Maybe it helps to find a reason.

Edited: 11 months  ago

ReplyQuote
(@mcfly)
Member
Joined:2 years  ago
Posts: 17

ReplyQuote
(@mcfly)
Member
Joined:2 years  ago
Posts: 17
22/01/2018 3:22 pm  

My specs:
Win10 64bit Build 16299
DirctX12
GTX 1070
NVIDIA Driver 388.43


ReplyQuote
(@mcfly)
Member
Joined:2 years  ago
Posts: 17
04/02/2018 1:02 pm  

any news?


ReplyQuote
(@bonnietc)
Member
Joined:2 years  ago
Posts: 20
04/02/2018 6:33 pm  

For my interest too. 


ReplyQuote
(@jhdgdrt5rfsua)
Administrator Admin
Joined:2 years  ago
Posts: 134
05/02/2018 3:24 pm  

Hi there

In Prepar3d.cfg file under panels you will find MAX_VC_TEXTURE_RESOLUTION=, make sure it's the default value 1024 and not 2048 or 4096.

Let me know if it works.


ReplyQuote
(@bonnietc)
Member
Joined:2 years  ago
Posts: 20
07/02/2018 6:29 pm  

The Resolution was 4096. I Set it to 1024 and it works fine. But the default  vc resolution in P3D was set by installatin  to 4096. I think this high resolution makes sense while using a 4K Monitor. So I think, putting the resolution to a minor one can not be the final resolution.

Greetings Volker


ReplyQuote
(@mcfly)
Member
Joined:2 years  ago
Posts: 17
07/02/2018 6:39 pm  

Sounds good... Unfortunality i can test it not before next week. Thanks for support. I hope its work for me tooo....


ReplyQuote
(@mcfly)
Member
Joined:2 years  ago
Posts: 17
12/02/2018 9:12 pm  

Yes, it works...
Thank you very much for support!


ReplyQuote
(@huggy)
Member
Joined:2 years  ago
Posts: 12
30/03/2018 10:36 am  

Hi

Janus wrote:

I would like you to change your Prepar3D configuration file, then max VC texture load back to 4096.  Then go to the aircraft panel configuration file and under VC Cockpit 01 you will see pixel_size = 2048,2048.  Change the 2048, 2048 to 1024,1024.  Leaving the following setting as is - size_mm = 2048,2048.

Back up your JSS_C160.A.CAB and download a new CAB folder from the following link and paste it into that panel folder.

https://www.dropbox.com/s/f8jccssrl1fcjaz/JSS_C160.A.CAB?dl=0

Since I had the problem too, I made the change as Janus had defined it. After that I made a flight under IFR rules from EDNY to ETSA. The problem no longer appeared with me. Everything went as it should ...
Thank you very much

Regards, Martin

 


ReplyQuote
(@bonnietc)
Member
Joined:2 years  ago
Posts: 20
02/04/2018 4:32 pm  

Hi Janus,

I also tested your changes and the new C160a_cab folder. Now it works fine. Thanks a lot!!!!! Now, the Trall is reborn for my P3D and I will enjoy flying the old Lady.

Greetings

Volker

 


ReplyQuote
Page 2 / 2 Prev
Share: